Nowadays, bathroom sink faucet is everywhere, such as beside the washbasin, or in the shower room. Each family need bathroom sink faucet , but what should we do when the faucet is broken? Maybe some people will say that you can ask for maintenance staff to repair the faucet. This method is right if the faucet has big problem. But if the problem is not too big, it is not affordable to find a maintenance staff. Today, I will introduce some repair techniques to you, I hope it can help you to save money. Of course, you should know the structure of faucet first.

First, the repair techniques of no water or less water

If the bathroom sink faucet has no water or less water, it may because there is some dirt in the water filter. To deal with this situation, you can remove the faucet and clean the filter with water than install the faucet again.

Second, the repair techniques of loosening handle

If the faucet handle is loosening and is not very careful about the installation process, or can not screw well to the handle, to deal with the situation, tighten the screws by hand, if it can not work, you can find a wrench or pliers to fix the handle. This method is very simple.

Third, the repair technique of leaking

If the handle can not close or after close it still leak, it because there is some hard item stuck sealing ports, if this situation happened, you can remove the valve cover then take the dirt out, clean the area around the valve then install the faucet again. Of course, if it is a little leaking, it belongs to common situation and if it doesn't last for a long time you don't need to repair the faucet.

Forth, the repair techniques of faucet noise

If encountered faucet noise, probably because of excessive pressure, hot and cold water pipes fixed bad, or is in the inlet pipe obstructions or scale. As this happens repair techniques are: first, to reduce the water pressure, should not you check pipes and water heaters, etc. Have not connected a good place, if there is to be installed once again. If the problem is not resolved. That is because there is obstruction or scale within the inlet, then you need to clean up the debris or scale.